Employment

Komline-Sanderson, a leading designer and builder of process machinery for liquid/solid separation and heat transfer for:

• food, chemical, pharmaceutical and other process industries
• municipal wastewater solids transfer and processing employs:
  • chemical engineers
  • environmental engineers
  • mechanical engineers
  • electrical engineers
  • service technicians
  • other skilled individuals at facilities in:
• Peapack, NJ USA

For more information, contact:

Current Openings

Senior Quality Assurance Specialist

Summary:

Provides assistance to the Director of Quality Assurance for activities involving quality assurance and compliance with applicable regulatory and manufacturing requirements; conducts audits, reviews/analyzes data and documentation. Requires ten (10) years of experience in a machining, welding, and fabrication environment. Requires working knowledge of commonly used engineering concepts, practices, and procedures.

Examines products to make sure they meet Komline-Sanderson and regulatory standards at receiving, in-process, and final inspections. Ensures vendors follow Komline-Sanderson product manufacturing standards and engineering drawings. Works at all stages of production inspecting the materials, goods, components and assemblies that comprise Komline-Sanderson products.

Job Duties:

1. Test and inspect products or processes. Evaluate quality and/or performance.
2. Must be fluent in ASME Code and be able to review blue prints and drawings.
3. Prepare test and inspection reports as required, using MS Office. (Reports shall not be handwritten.)
4. Inspect, materials and equipment to Komline-Sanderson and ASME or other pressure vessel code or welding standards, as required.
5. Perform vendor evaluations using written guidelines that have been established by the Director of Quality Assurance.
6. Determine the causes of technical problems and find solutions.
7. Provide on-the-job training to Komline-Sanderson employees and vendors as required.
8. Knowledge and/or ability to qualify welders/operators in accordance with PED and ASME Section IX as required of the Director of Quality Assurance. Prepare welder/operators qualification records in accordance with PED or ASME Section IX as a designee of the Director of Quality Assurance.
9. Required to use test equipment to include but, not limited to UT gauges, calipers, fillet gages, profilometers, micrometers, durometers, psychcrometers, and other test equipment as required.
10. Use and read gauges and dials to determine if the equipment is running properly;
11. May direct the activities of the quality control department, in the absence of the Manager.

Employment Standards:

1. Must be able to contribute to quality and integrity of the product.
2. Must have a good understanding of manufacturing processes with emphasis on our specific products. This includes a working knowledge of piping, structural steel, gears, motors, machinery and fabricating processes. Must have general knowledge of machine components, and basic fabrication and machine shop practices.
3. Must be able to read work orders and blueprints.
4. Must have comprehensive knowledge of welding, welding practices, and welding defects.
5. Must have Level II competency from Komline-Sanderson or previous employer in at least one of the following VT, MT, PT, RT or UT methods. Competency may be by job performance or examination. SNT-TC-1A and Komline-Sanderson written practice shall be followed.
6. Must be able to communicate effectively with internal and external customers and sub-contractors.
7. Must be an effective problem solver and have the ability to make sound decisions.
8. Must be committed to affect ongoing product improvement.
9. Must be able to establish priorities.
10. Must continue on-the-job training as required by the position or the Company.

Prerequisites:

1. Must have a good working knowledge of the NBIC code, ASME code Sections VIII, IX, II (a, b, c, d), and V.
2. Must be able to review ASME Code calculations and engineering drawings to ASME Code Standards and in the absence of the Director of Quality Assurance, perform as his designee.
3. Must be able to prepare preliminary WPS's using Section IX of the ASME Code.
4. Must be accurate with close attention to detail.
5. Must be able to travel domestically and internationally as required, sometimes with limited advance notice.
6. Must be able to read, write, and communicate effectively in the English Language.
7. Should be computer literate, with working knowledge of Excel, Word, etc.
8. Must have excellent interpersonal skills and be a team player.
9. AAS degree, BS preferred, CAWI or CWI, desired.

We provide an excellent working environment and benefits including medical, dental, life, 401(k), and pension.

Qualified candidates should submit resume and salary history in confidence to:

Contact:
A. J. Oswald
Email HR to email me.
fax: 1 908 234 9590
EOE-M/F 04-05